• From Wilson Combat: The SHOK-BUFF® prevents the slide from battering the frame during recoil by sandwiching a 1/10" thick poly fiber buffer between the slide and frame contact areas. When you are shooting high performance loads in your 1911 style pistol, you want the extra protection that the original SHOK-BUFF® provides.  
    • Prevents the Slide from Battering the Frame During Recoil
    • Optimum Balance Between Shock Absorption and Longevity
    • Easily Replaceable
    • Absorbs Up to 1,000 Rounds of Repeated Firings
    • Slides Over the Recoil Spring Guide Between Guide and Spring
    • Original Injection Molded SHOK-BUFF®
    • Royal Blue and Bears the SHOK-BUFF® Name
       
  • Atlas Gunworks Barrel Link
    • Available in sizes #3, #4, #5
    • #3 - .278" center to center industry standard G.I. Spec
    • #4 - .283" center to center
    • #5 - .288" center to center
    • Machined from heat-treated steel and blued
  • Colt Sear Spring
    • Genuine Colt® Factory Replacement Part
    • Carbon Steel
    • Nickel Finish
    • Factory Replacement Part from Colt
    • Manufacturer Part #SP50179
  • Wolff Recoil Spring for 1911/2011 Pistols
    • Available in several weights
    • Each comes with an extra power firing pin spring
    • Atlas Gunworks recommendations below!
    TEST YOUR SPRINGS
    1. When you get them! You should always test your new spring weight/pressure and record the exact number.
    2. While you're using them! Continue to test your spring while in use to make sure it hasn't lost pressure (scroll down for details)
     
  • Need a new firing pin? Every Atlas Gunworks pistol uses this 1911/2011 Small Diameter Extended Length Firing Pin by Dawson Precision. This pin is also available for purchase as a kit with grip bushings.
  • Includes:
    • 1 Front Grip Bushing (.226)
    • 2 Front Grip Screws (black or silver)
    • 2 Rear Grip Screws (black or silver)
    • 2 Rear Black Oxidized Grip Bushings
    • Angle Cut
    • Near drop-in fit
    • 50 RC
    • Black Oxidized
    • Flat-topped
  • Atlas Gunworks 2011 Magazine Mop and Brush Kit
    • One (1) soft mop brush with bristle detail end (color may vary)
    • One (1) stiff-bristle GTUL brush
  • X-Line Vario Trigger Bow by Geppert
    • Stainless Steel Trigger Bow for 2011 or 1911
    • Works with our X-Line Vario Trigger Shoes
  • Racing requires spare parts. These parts are at the top of the list. Keep them in your range bag, just in case.  
  • Geppert Handelsunternehmen X-Line Vario Trigger System
    • Vario: Adjustable Length The length of the trigger is individually adjustable, because the trigger shoe is attached with a thread on the trigger plate. The distance can be reduced or enlarged by tuning.
    • Pre-Travel Adjustment Tabs
    • Self-Locking Overtravel Adjustment Screw
    • Just the trigger shoe, or as a whole system with a 1911 or 2011 bow
    • Available in other sizes, curved and flat trigger faces
    Includes:
    • Milled Aluminum Trigger Shoe
    • Allen Key for Adjustment
    • (OPTIONAL) Stainless Steel Trigger Bow (1911 or 2011)
  • Geppert Handelsunternehmen X-Line Vario Trigger System
    • Vario: Adjustable Length The length of the trigger is individually adjustable, because the trigger shoe is attached with a thread on the trigger plate. The distance can be reduced or enlarged by tuning.
    • Pre-Travel Adjustment Tabs
    • Self-Locking Overtravel Adjustment Screw
    • Just the trigger shoe, or as a whole system with a 1911 or 2011 bow
    • Available in other sizes, curved and flat trigger faces
    Includes:
    • Milled Aluminum Trigger Shoe
    • Allen Key for Adjustment
    • (OPTIONAL) Stainless Steel Trigger Bow (1911 or 2011)
  • Geppert Handelsunternehmen X-Line Vario Trigger System
    • Vario: Adjustable Length The length of the trigger is individually adjustable, because the trigger shoe is attached with a thread on the trigger plate. The distance can be reduced or enlarged by tuning.
    • Pre-Travel Adjustment Tabs
    • Self-Locking Overtravel Adjustment Screw
    • Just the trigger shoe, or as a whole system with a 1911 or 2011 bow
    • Available in other sizes, curved and flat trigger faces
    Includes:
    • Milled Aluminum Trigger Shoe
    • Allen Key for Adjustment
    • (OPTIONAL) Stainless Steel Trigger Bow (1911 or 2011)
  • Geppert Handelsunternehmen X-Line Vario Trigger System
    • Vario: Adjustable Length The length of the trigger is individually adjustable, because the trigger shoe is attached with a thread on the trigger plate. The distance can be reduced or enlarged by tuning.
    • Pre-Travel Adjustment Tabs
    • Self-Locking Overtravel Adjustment Screw
    • Just the trigger shoe, or as a whole system with a 1911 or 2011 bow
    • Available in other sizes, curved and flat trigger faces
    Includes:
    • Milled Aluminum Trigger Shoe
    • Allen Key for Adjustment
    • (OPTIONAL) Stainless Steel Trigger Bow (1911 or 2011)
  • Geppert Handelsunternehmen X-Line Vario Trigger System
    • Vario: Adjustable Length The length of the trigger is individually adjustable, because the trigger shoe is attached with a thread on the trigger plate. The distance can be reduced or enlarged by tuning.
    • Pre-Travel Adjustment Tabs
    • Self-Locking Overtravel Adjustment Screw
    • Just the trigger shoe, or as a whole system with a 1911 or 2011 bow
    • Available in other sizes, curved and flat trigger faces
    Includes:
    • Milled Aluminum Trigger Shoe
    • Allen Key for Adjustment
    • (OPTIONAL) Stainless Steel Trigger Bow (1911 or 2011)
  • Geppert Handelsunternehmen X-Line Vario Trigger System
    • Vario: Adjustable Length The length of the trigger is individually adjustable, because the trigger shoe is attached with a thread on the trigger plate. The distance can be reduced or enlarged by tuning.
    • Pre-Travel Adjustment Tabs
    • Self-Locking Overtravel Adjustment Screw
    • Just the trigger shoe, or as a whole system with a 1911 or 2011 bow
    • Available in other sizes, curved and flat trigger faces
    Includes:
    • Milled Aluminum Trigger Shoe
    • Allen Key for Adjustment
    • (OPTIONAL) Stainless Steel Trigger Bow (1911 or 2011)
  • Geppert Handelsunternehmen X-Line Vario Trigger System
    • Vario: Adjustable Length The length of the trigger is individually adjustable, because the trigger shoe is attached with a thread on the trigger plate. The distance can be reduced or enlarged by tuning.
    • Pre-Travel Adjustment Tabs
    • Self-Locking Overtravel Adjustment Screw
    • Just the trigger shoe, or as a whole system with a 1911 or 2011 bow
    • Available in other sizes, curved and flat trigger faces
    Includes:
    • Milled Aluminum Trigger Shoe
    • Allen Key for Adjustment
    • (OPTIONAL) Stainless Steel Trigger Bow (1911 or 2011)
  • Secure Firearm Products Spring Tester
    • Determine if the coil springs in your firearm need replacing
    • Organize and label loose springs in your range bag or on your work bench
    One of our #1 Rules: ALWAYS test springs! NEVER trust the packaging!
  • Atlas Gunworks is proud to offer all of the best 1911/1911HC parts that we use here on our pistol builds. We love these mag releases and continually use them in conjunction with our pistol builds that use the Phoenix Trinity Evo Grip!
  • Atlas Gunworks is proud to offer all of the best 1911/1911HC parts that we use here on our pistol builds. We love these mag releases and continually use them on all of our single stack builds!
  • Atlas Length EGW 9mm/38SC HD Extractor We had Evolution Gunworks cut their EGW Series 70 HD Extractor for 9MM/38/40 to fit our slide specifications for 9mm/38.
    • Designed to work with all Atlas Gunworks 9mm/38SC slides and pistols
    • Acute angle hook design
    • Vacuum heat treated
    • Blued
    • Gunsmith fit

  • EGW HD Extractor 40SW/10mm Series 70 This extractor is EGW part number 10310, for 9mm/38/40. However, in Atlas Gunworks pistols and slides, these are ideal for 40SW/10mm only. Use our length extractor for your 9mm/38sc slides.
    • Designed to work with all Atlas Gunworks 40SW/10mm slides and pistols
    • Acute angle hook design
    • Vacuum heat treated
    • Blued
    • Gunsmith fit

    • .200" Pin Diameter
    • Works well in new style PT Frames
    • Serrations on paddle
    • Calibers: 9mm/.38/.40
    • Weight: .3oz
    • 17-4 Stainless Steel